Belkin F5U219ea Manual Del Usuario página 16

P73941ea-B_F5U219uk 14-03-2003 10:57 Page 12
Verifying Proper Installation (Belkin Driver)
After installation is complete, check the Windows Device Manager to
confirm that all components of the PCI Card have been properly
installed.
1. Right-click on "My Computer".
2. Select "Properties".
3. Select the "Hardware" tab and click on the "Device Manager" button.
4. After installation of the Belkin USB 2.0 driver, you will notice that a
second "Universal Serial Bus Controllers" heading has been added to
the device list.
a) Click the plus sign (+) next to the original "Universal Serial Bus
Controllers" heading. You will find that two "NEC USB Open Host
Controller" entries and two "USB Root Hub" entries have been
added to the list of devices.
b) Click the plus sign (+) next to the new "Universal Serial Bus
Controllers" heading. You will find one entry for "Belkin USB 2.0
Hi-Speed Host Controller" and one entry for "USB 2.0 Root Hub
Device".
Note: If your computer features built-in USB ports, or if you have other
USB PCI controller cards installed, you will see additional USB
controller and root hub entries in the Device Manager list.
INSTALLATION
12