Menu Structure - Televes Avant 5 Manual De Instrucciones

User instructions

Menu structure

zcczxvcvzcv
When the unit is switched on, by pressing the
MAIN Menu
1. Input configuration
2. Filter 1
3. Filter 2
4. Filter 3
5. Filter 4
6. Filter 5
7. Filter 6
8. Filter 7
9. Filter 8
10. Filter 9
11. Filter 10
12. Output level configuration
13. IF configuration
14. VHF configuration
15. FM configuration
There is also an extended menu option which can be accessed from any submenu of the main menu by pressing
the button for more than three seconds. Once in the extended menu, the following secuence of options will appear
when pressing the button:
EXTENDED Menu
1. Status of the filters.
2. Language selection
3. CDC address
4. Default configuration
5. PIN (Password) to lock the unit
: Adjustment OK
: Level low
: Level high
ø
: Empty filter
Note: If you wish to modify the language of the menus before starting to configure the device, you must enter the
"Language" menu. Proceed by pressing the
the button once and then by means of
save the changes. For further information, see "Extended Menu = > Language Selection" section.
button for a short time, the user can scroll through the main menus:
FM Config
FM: ON
Offset: +3dB
VHF COnfig
VHF: OFF
Offset: --
FI Config
Att: 0dB
EQ: 0dB
LNB: 0V/--
Password
--------
0 0 0 0
Load
default
settings?
NO
buton for three seconds to enter the Extended Menu, then press
or select the language. Finally press the
38
UHF Config
U1: 9 - OFF
U2: 0 - Auto
U3: 1 - OFF
FILTER 1
-- -- --
-- --
Offset: --
FILTER 2
-- -- --
-- --
Offset: --
FILTER 10
-- -- --
-- --
Offset: --
Output level
OL: 111dBµV
UHF EQ: 0dB
F1- F2ø F3-
F4ø F5ø F6-
F7ø F8ø F9ø
F0ø VHFø FMø
Language
selection
---------
English
CDC
Address
-------
001
button (long press) to
"Avant 5"