Denon DJ MCX8000 Guia De Inicio Rapido página 3

Setup
Important: Occasionally, we may update MCX8000's firmware to improve its performance.
Visit denondj.com
software (firmware updates may address new software features).
Note: Items not listed under the
1. Visit denondj.com
DJ product.)
2. In your account, download and install the latest versions of Engine and Serato DJ.
3. Windows users only: In your account, download and install the latest Windows driver.
4. Connect input sources (microphones, CD players, etc.) to MCX8000.
5. Connect output devices (headphones, power amplifiers, loudspeakers, etc.) to MCX8000.
6. Plug all devices into power sources, and turn on devices in proper order:
• When starting a session, turn on (1) input sources, (2) MCX8000, (3) output devices.
• When ending a session, turn off (1) output devices, (2) MCX8000, (3) input sources.
7. To use Serato DJ: Using a standard USB cable (included), connect the USB port on
MCX8000 to your computer. Open Serato DJ and go! For more information on how to use
Serato DJ with MCX8000, visit
To use Engine (standalone playback): Insert a USB flash drive (with an Engine-configured
music library) to one of MCX8000's USB ports.
Power
Computer
(This hub will connect to
your computer; you cannot
access its content using
MCX8000.)
to check for available firmware updates, especially after you update your
Introduction > Box Contents
and log into your account. (Create an account if this is your first Denon
serato.com/dj/support
Monitors
Hard Drive
Powered Loudspeakers
Headphones
Audio Player
(smartphone,
(to front panel)
tablet, etc.)
are sold separately.
and select Denon DJ MCX8000.
Turntable,
CD Player, etc.
USB Flash Drive
(on top panel)
Microphone
3