Gobo Access - Chauvet DJ INTIMIDATOR SPOT 365 IRC Guía De Referencia Rápida

Intimidator Spot 355 IRC QRG EN

Gobo Access

For information about changing gobos see the Intimidator Spot 355 IRC User
Manual on the Chauvet web site at http://www.chauvetlighting.com/product-manuals-
literature/.
Gobo Access Door
AC Power
Intimidator Spot 355 IRC has an auto-ranging power supply that works with a
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Power Linking Power linking is when products are daisy chained together through their Power In
and Power Out sockets, so that many products can be powered from one outlet.
For the maximum number of Intimidator Spot 355 IRCs that can be power linked
at 120 V or at 240 V, see the User Manual or the label on the product.
The User Manual is available at the Chauvet website:
http://www.chauvetlighting.com/product-manuals-literature/.
Fuse Replacement 1. Disconnect the product from power.
2. With a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse.
4. Replace with a fuse of the same type and rating.
5. Screw the fuse holder cap back in place and reconnect power.
Disconnect the product from power before replacing the fuse.
4