jbc CP-D Serie Manual Del Usuario página 7

Changing cartridge
Turn the station off and follow these guidelines for a safe cartridge change:
1. Removing
Loosen the screw and remove the cartridge.
Use a flat plier if the cartridge is still hot.
3. Aligning
Alignment
Use a flat plier for a safe tip alignment.
Do not over-tighten the cartridge.
Compatible cartridges
CP station works with C120 cartridge range. Find the model that best suits your soldering needs
in www.jbctools.com
C120-004
1,5mm
ø0,7
2. Inserting
Important: Insert the cartridge as far as
the mark for a correct connection.
4. Fixing
Important: Tighten the screw. This is
necessary for the tool to function.
C120-005 C120-001
5mm
w w w.jbctools.com
Mark
C120-009
C120-009
ø 0,2
C120-010
C120-010
7