Control Panel - CASO DESIGN HW 600 Manual Del Usuario

13.2 Control panel

Descaling: Device needs to be descaled.
Lack of water: Add water.
Baby-button for dispensing of water with 40°C for preparation of baby food. Water with
40°C will be dispensed as long as button is pressed.
Please note
► Do not fill milk into the device.
Warning
► Avoid the risk of burns: Please check the temperature of the food before you give it
to your baby. This can easily be done on the back of your hand.
Lock-button: Press the button for about 3-5 seconds to unlock the device.
After approximately 10-15 seconds without operation it locks automatically. Press the button
again to unlock the device.
Temp-button: Set the desired temperature according to 000 (normal temperature
water), 40°C, 50°C, 60°C, 70°C, 80°C, 90°C, 100°C.
32