Warning: a. clean water is necessary;
b. make sure the drip tray is fit into the notch to avoid
water flow to the desk;
c. the drip tray can load 450ml water;
CLEANING BEER TAP MECHANISAM
Beer cooler need conformity with hygienically demand, it need
clean before the first use or for long time use, clean the whole
machine
with
recommended as following:
Load the warm water into the cleaning kit.
1.
And connect the end of piercing pin, press the water into the pin
2.
to clean the pin tube, and push the water out from the beer tube
at the other end. And repeat this cleaning work till the beer tube
clean (need 3 bottles warm water at least); please clean the
beer tap mechanism as figure 30. Note: Please disassemble the
tap when make the cleaning. (Show as figure 29)
Dispensing unit
Please open
the faucet
when you
are cleaning
the beer
tube
dry
cloth.
Beer connector must
connect with dispensing
unit
Cleaning bottle
Figure 29
Otherwise
two
This connector must connect
with cleaning bottle
Figure 30
cleaning
way
is