MAINTENANCE
If the beer cooler does not work properly, please call the service
center. To save time and money, before you call for service, check
the Troubleshooting Guide. It lists cause of minor operation
problems that you can correct yourself.
Troubleshooting
Trouble
The tap does
not work /
can't pour beer
out
Too much
bubble pouring
out
Beer flows out
too slowly
Cause
1. The pouring tube is in poor
connection or CO2 supplying
is cut off
2. No keg or no beer in the
keg;
3. No gas in the CO2 cartridge
4. The CO2 pressure regulator
knob is close
1. Use a wrong way to pour
beer out
2. The beer temp is high
(better at 3-5℃)
3. The keg is shaken before
usage
4. Almost no beer in the keg
5. Too much pressure in the
keg
1. inside CO2 pressure isn't
high enough
2. The connection tube or
pouring tube has leakage
Troubleshooting
1. Well connect the pouring tube
and CO2 supplying
2. Change a new keg
3. Change a new CO2 cartridge
4. Turn the CO2 pressure regulator
knob on "+" position
1. Use the right way to pour beer
out
2. Cool the beer down to 3-5℃
3. Put the beer keg aside a while till
no bubble inside
4. Change a new keg
5. Adjust the pressure knob to "-"
direction to decrease the pressure
or close the knob
1. Adjust the pressure knob to
release much CO2 pressure or
replace a new one.
2. Check whether the tube is
leakage or not, if so replace the
tube