Maintenance; Inspection; Filter Change; Breathing Tube - MSA OptimAir 3000 Manual De Operación

MAINTENANCE

4. Maintenance
4.1.

Inspection

All parts of the OptimAir must be cleaned and checked for damage and wear
each time it is used. If necessary, the parts must be replaced. Parts checked are:
Breathing tube and connections

All filters

Charge condition of the battery

Basic apparatus OptimAir

Attention!
Further repair work must only be performed by MSA or by an
authorised customer service organisation.
4.2.

Filter change

Attention!
Only change the filters in pairs and using filters of the same type.
( Filter operating manual)
Exhausted or damaged filters should be replaced as follows:
(1) Remove the filter caps and remove the filters
(2) Insert new filters ( section 3.2)
(3) Re-calibrate the apparatus ( section 3.3)
4.3.

Breathing tube

Before each use check the tubing for damage such as tears or holes.
Damaged tubing must be replaced by new tubing.
12
OptimAir 3000, 3000A and 3000EX
MSA