JBS Advanced Serie Manual Del Usuario página 4

ENGLISH
SPECIFICATIONS
The JT 7700 is a hot air generating station intended
for repair work involving electronic circuits with
SMDs of any size.
- JT 7700 230V
- JT 7700 120V
- JT 7700 100V
JT 7700 is also sold supplied without extractors
or protectors:
- JT 7700 230V WE
- JT 7700 120V WE
The station's components
- Control unit with 1000 W heater
- JT 8700 heater stand
- Extractor stand
- Set of 5 protectors (Fig. 1, page 56)
- Set of 5 extractors (Fig. 2, page 56)
- 2 tripods for the protectors (Fig. 1, page 56)
- Set of 4 suction cups
- 3 nozzles:
ø 4
ø 6
ø 8
In order to make the nozzles removal easier, the
stand has a special bushing (Fig. 3, page 56).
- Suction tube with connectors
- Pedal with cable and connector Ref. 0964551
- Spare filters
- Instruction manual
Control unit technical specifications
- Temperature selection from 150 to 450°C (300
to 840°F).
- Accuracy of selected temperature: ± 5%
- Air flow regulation: 6-45 l/min
Ref. 7700200
- Station's maximum power: 1000W
Ref. 7700100
- ESD protected housing.
Ref. 7700101
Typical surface resistance: 10
- Equipotential connector and the metallic part
of the heating element are connected to
Ref. 7710200
station mains ground supply for ESD
Ref. 7710100 protection.
- Complies with CE standards on electrical
safety, electromagnetical compatibility and
antistatic protection.
- Weight of complete unit: 8.7 kg (19.2 lbs).
Ref. 0828700
Ref. 0932845
Ref. 0930110
Safety measures
-
Ref. 0932015
-
Ref. 0932012
Ref. 0932020
-
-
Ref. 0932330
-
Ref. 0786620
Ref. 0001524
2
This product should not be thrown in the
garbadge.
Incorrect use of this tool may cause fire.
Be cautious when using the tool in places
where inflamable products are stored.
Heat can cause fire to inflamable products
even when they are not in sight.
Do not use when the atmosphere is
explosive.
Place the tool back on its stand in order to
let it cool down before you store it.
5 11
-10 Ohms/square