General - ICAN 20-100 Instrucciones De Uso

ICAN FULL FACE is a CE-marked full face mask (class 2), tested and approved in
accordance with EN 136:1989, pr EN 136:1996 (sections 5 and 8), and standard
thread connection in accordance with EN 148-1:1987.
ICAN FULL FACE covers the eyes, nose, mouth and chin. The full face mask pro-
tects the user's eyes and respiratory organs against harmful aerosols, fumes and
gases.
ICAN FULL FACE is produced in 2 material types:
ICAN Neoprene Rubber is a soft material which is kind to the skin
and is suitable for the majority of working situations in which a half
mask is required.
ICAN Silicone is kind to the skin, and is a very soft and comfortable
material which is only affected by ageing to an extremely limited
degree. Perfect for tasks where there is, for instance, a risk of
adhesion of dyes.
ICAN FULL FACE's mask body, which consists of kind-to-the-skin neoprene
rubber / silicone, is constructed with a double sealing border which thus provides
an extra safety zone.
ICAN FULL FACE is constructed with an inner mask of soft neoprene rubber /
silicone, which is kind to the skin. Two large valves ensure that the inhalation
resistance is very small.
ICAN FULL FACE is equipped with adjustable straps ("quick release") made from
kind-to-the-skin neoprene rubber / silicone which ensure a rapid, perfect and
comfortable fit.
ICAN FULL FACE has a large visor which is resistant to impact and ensures an
extensive field of vision to all sides.
ICAN FULL FACE is designed so that the incoming air passes over the visor and
prevents it from misting up. However, in the event of a large temperature
difference between the visor's inner and outer side, it is recommended that an anti-
misting agent be used (e.g., "Klar-Pilot Fluid Super").
ICAN FULL FACE is equipped with a very effective speech membrane made of
synthetic film.

GENERAL

20-100/ 300 JULI 02 REV. 01. (GB)
(GB) 2
 copyright 2002