ICAN 20-100 Instrucciones De Uso página 45

PUTTING ON - ADJUSTING - REMOVING
PUTTING ON THE MASK
1. Put the carrying strap around the neck.
Loosen all the straps on the mask and spread
them out completely. Put on ICAN FULL
FACE with the chin section first.
2. The mask should be pulled in towards the
face, and the straps pulled over the head and
down towards the back of the head until the
headband is flat.
:
ADJUSTMENT
Adjust ICAN FULL FACE until it sits
correctly:
A. Both neck straps should be tightened
(pulled backwards) simultaneously.
B. Both temple straps should be tightened
(pulled backwards) simultaneously.
C. If the forehead strap is not flat and tight
(for example, if the head is smaller than
average), the forehead strap should be
tightened by pulling it backwards.
:
REMOVAL
The neck straps' quick release buckles
should be loosened, the mask pulled down
away from the face and then up over the
head (the temple straps can be loosened in
the same manner).
:
20-100/ 300 JULI 02 REV. 01. (GB)
(GB) 4
C
 copyright 2002
B
A