Keeping It Running Properly - Hoover SPOTLESS Manual Del Usuario

Keeping your Spotless Portable Carpet Cleaner running properly:
LUBRICATION
The motor is equipped with bearings
which contain sufficient lubrication.
Additional lubricant could cause
damage. Do not add lubricant to
motor.
Familiarize yourself with these home
maintenance tasks. Proper use and care of
your cleaner will ensure continued cleaning
effectiveness.
Any other servicing should be done by
an authorized service representative. If
appliance is not working as it should, has
been dropped, damaged, left outdoors,
or dropped into water, take it to a service
center prior to continuing use.
Note: During normal use, debris may
accumulate inside of dirty water tank. In
order to keep your unit functioning properly,
rinse out your dirty water tank with fresh
water after each use.
11
1
Clean your hose using Hoover exclusive Self-Clean technology:
a. EMPTY DIRTY WATER TANK. You can empty and rinse the tank through the
quick cap on the top of the tank or by turning the cap on the bottom counter
clockwise. Replace back onto the unit.
b. Add warm water to the small mess fill line on the clean water tank.
c. Remove any cleaning tool/attachment from the hose.
d. Turn unit on and push the open end of the hose into yellow self-clean port on
the back of the unit for 5-10 seconds only. DO NOT PRESS TRIGGER. The
clean water from the clean water tank will rush through the hose, effectively
cleaning and removing the odor causing bacteria left in the hose.
e. Repeat process as needed and turn off the unit when hose is fully clean.
a b d