Bushnell 111026 Manual página 13

Binocular instructions
2. Set the "diopter adjustment" to zero (Fig. 2).
3. Keep both eyes open at all times.
4. Using a lens cover or your hand, cover the objective (front)
lens of the right side of the binocular.
5. Using the center focus wheel, focus on a distant object with
fine detail (e.g., brick wall, tree branches, etc.), until it appears
as sharp as possible through the left side of the binocular.
6. Uncover the objective lens on the right side, cover the left
objective lens, then view the same object.
7. turn the "diopter setting" adjustment ring, until the object
is sharp for your right eye. Caution should be used as over turning or forcing the
diopter eyepiece may damage the binocular.
8. Your binocular should now be adjusted for your eyesight. Focus at any far or near
distances can now be attained simply by turning the center focus wheel. Make a
note of your diopter setting for reference.
Eyecups
the imageView binocular is fitted with rubber roll-down eyecups designed for your
comfort and to exclude extraneous light. if you wear glasses, roll down the eyecups.
this will bring your eyes closer to the ocular (eyepiece) lenses, so you can more easily
view the entire image without any cutoff.
Using the Binocular
13
FIg. 2 DiOPtER ADJ.