Description Of Symbols; Environmental Protection - GMC ROS150CF Manual De Instrucciones

Introduction
Thank you for purchasing this GMC tool. This manual contains information necessary for
safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
GB
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries.
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
Caution!
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.

Environmental Protection

Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer for
recycling advice.
Original Instructions
Technical Abbreviations & Symbols Key
V
~, AC
A, mA
n
o
Nm
°
Specification
Model number:
Voltage:
Power:
No load speed:
Sanding sheet attachment:
Sanding sheet diameters:
Oscillating diameter:
IP rating:
Protection class:
Weight:
Sound and vibration information:
Sound pressure L
Sound power L
WA
Uncertainty K:
Weighted Vibration a
Weighted Vibration a
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures
are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
6
Volts
Ø
Alternating current
Hz
Ampere, milli-Amp
W, kW
No load speed
/min or min
Newton metres (torque)
rpm
Degrees
dB(A)
ROS150CF
230–240V~, 50Hz
430W
4000–12,500min-
Hook & Loop
Ø150mm and Ø125mm
2mm
IP20
2.95kg
: 77dB(A)
PA
: 88dB(A)
3dB
(main handle): 6.895m/s
h
(front handle): 7.522m/s
h
1.5m/s²
Diameter
Hertz
Watt, kilowatt
Operations per minute
-1
Revolutions per minute
Decibel sound level
(A weighted)
1
2
2