Mounting Diagram - Chauvet DJ MINI KINTA IRC Manual Del Usuario

Mini Kinta™ IRC QRG
AC Power
Power Linking
Fuse
Replacement
Mounting
Mounting
Diagram
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
Power linking is when products are daisy chained together through their
Power In and Power Out sockets, so that many products can be powered
from one outlet.
For the maximum number of Mini Kinta™ IRC units that can be power
linked at 120 V or at 240 V, see the User Manual or the label on the product.
The User Manual
www.chauvetlighting.com/product-manuals-literature/.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
Clamp
(such as the
CLP-15N
from Chauvet)
Safety Cable
(such as CH-05
from Chauvet)
is available at
Safety
4
the Chauvet
Notes.
Mounting
Bracket
Bracket Adjustment
Knob x 2
EN
website