Olymp LavaSit DINER Shiatsu Instrucciones De Servicio página 9

c. Cleaning of basin and base
·
Rub dry with a soft cloth or microfibre cloth.
·
Stubborn spots and calcified deposits should be removed using a mild cleansing agent.
·
On no account should abrasive cleansers or solvents be used!
2. Comfort chair
Chair with Shiatsu Massage Function
· What is a shiatsu massage?
> A combination of far eastern medicinal massage and western anatomic-physiological treatment
using finger pressure
· What good is shiatsu?
> Bodily tension and indurations can be dissipated
> Stress symptoms and their consequences can be relieved
> Vitalisation of the organism, bodily self-healing can be activated
> A state of relaxation can be achieved
· How does the LavaSit Diner Shiatsu massage function work?
> A massage module is integrated in the backrest of the chair
> Moving rollers apply manual pressure on the back through the upholstery
> Vertical movement reaches the customers' upper and lower back sections
· Medical Warnings:
> Pregnant women, sick persons and children should not use the shiatsu massage.
> If injury to the spine exists or after operations the massage can be dangerous.
In case of uncertainty ask your doctor's advice beforehand.
> Massage should never give an unpleasant feeling. Excessive massages can be harmful for your
body. If you get an unpleasant feeling break off the massage immediately.
> The shiatsu massage function cannot replace physiotherapy.
·
You can control the massage function using the remote control as follows (Fig. 3):
A When the control lamp „On" (A) lights up green, your system is under power and ready
for use.
B Use the „Prog." (B) button for the massage programme:
Press button 1x
Press button 2x
Press button 3x
Press button 4x
Press button 5x
C By means of the „STOP" button (C) you can switch off all massage programmes at any time.
(Massage unit returns to park position).
GB
= Programme 1 „Energy":
> powerful massage over the whole back
> control lamp „Energy" (D) lights up:
= Programme 2 „Dream":
> light massage over the whole back
> control lamp „Dream" (E) lights up
= Programme 3 „Relax":
> medium strength massage over the whole back
> control lamp „Relax" (F) lights up
= Programme 4 „Backflex":
> stretching of the lumbar vertebrae only
> control lamp „Backflex" (G) lights up
= return to programme 1
2