Zodiac TR2D Manual Del Usuario página 7

Connect the Wheel Deflector Ring
The wheel deflector ring pivots on the hose to help
direct the TR2D around steps and other obstacles
in the pool.
Attach the wheel deflector ring assembly to the end
of the last Twist-Lock hose cuff.
Connect the Cleaner
To avoid serious injury, turn off the suction pump for the cleaner before performing this step.
1. Submerge the cleaner and flood it with
water.
2. When bubbles stop coming out of the cleaner,
connect the hose to the cleaner by pushing the
wheel deflector assembly C-clip onto the outer
extension pipe until it locks into position with a
clicking sound.
3. Allow the cleaner to drift to the bottom of the
pool. Turn on the pool pump to begin cleaning.
Installation is complete.
|
Owner's Manual Zodiac TR2D Pool Cleaner
®
WARNING
ENGLISH Page 7