Handling And Transportation; Installation And A Djustment - Global Air NPA1 Serie Manual De Uso Y Cuidados

working, wat er-full mark
to automatically recover operation. (For more information about how to drain, refer to the "Drainage
Instruction" please).
3. Delay protection function of compressor
This unit offers restart protection to compressor. Except that the compressor may start immediately when the
unit is energized first time, there is 3-minute delay restart protection after compressor is shut down.

Handling and Transportation

Hold the top of the ai r outlet in front panel with one hand and the handle at the top of back panel with another hand to
move the unit in upright position
Notes:

Do not hold the horiz ontal louvers by hand.

Make the unit in the upright position whatever handling or moving it.

Drain the water in the unit completely to prevent water leakage or wet the floor or carpet before handling or moving
the unit.
Installation & Adjustment
Warning:

Keep this mobile air-conditioner in upright position at least 2 hours before first installation.

Keep the unit in upright position while moving it. The air-conditioner shall be placed at flat surface.

Do not install or operate this air-conditioner in bathroom or other wet environments.
1 Installation of exhaust hose assembly.

Extend the exhaust hose, screw the round connector and adapter int o exhaust hose by counter clockwise
direction.

Screw connector and adapter into right positions, at least 3 laps, to keep good connection of exhaust hose
assembly.
and "FL" is flashing on LED window. You need to drain the condens ate for unit
10
Handle
Air outlet