4 Cleaning and maintenance
Note:
• Do not attempt to clean the particle sensor with a vacuum cleaner�
• Switch off the air purifier and unplug from the power socket before following action�
Cleaning the body of the air purifier
Use a soft, dry cloth to clean both the interior and exterior of the air purifier
and the air outlet (fig u)�
Cleaning the particle sensor
Clean the particle sensor every 2 months for optimal functioning of the
appliance�
1
Clean the particle sensor inlet and outlet with a soft brush (fig v)�
2
Clean the particle sensor with a damp cotton swab� Dry all parts
thoroughly with a dry cotton swab (fig w)�
Cleaning the surface of the filter
Clean the surface of filter with vacuum cleaner when the filter cleaning alert
display on the screen (fig x)�
1
Pull the back cover and remove it from the appliance (fig c)�
2
Pull the filter from the appliance (fig d)�
3
Clean the surface of the filter with a vacuum cleaner (fig y)�
4
Put the filter back into the appliance (fig f)�
5
Reattach the back cover (fig g)�
6
Touch the
button to switch on the appliance (fig h)�
7
Touch and hold the filter status check/reset button
reset the filter cleaning time (fig z)�
8
Wash your hands thoroughly after cleaning the filter (fig {)�
EN
6
for 3 seconds to