LG VP0716WNVQD Manual De Dueño página 6

2. CONTENTS AND
SPECIFICATION
2.1. Carton Content
2.1.1 Carefully unpack the carton.
2.1.2 Locate the two side clasps which
hold the top section in place.
2.1.3 Undo the clasps, remove the top
section and take out the items in
the tank.
2.1.4 Check and identify each
component as listed below. If
anything is missing or damaged
please contact your supplier
immediately.
2.2. Specifications
Motor 220V ~ 50Hz
Filter - Dry
Paper Bag and Re-usable filter
Filter - Wet Foam filter.
Item Description
1 Handle.
2 Exhaust outlet cover for HEPA
filter.
3 HEPA filter.
4 Shut-off valve basket.
5 Floating cup valve.
6 Cable storage hook.
7 Accessory storage hole.
8 Extension tube holder .
9 Main switch.
10 Vacuum hose inlet.
11 Foot with castor.(x4)
12 Clasp. (x2)
13 Tank
14 Hose.
15 Dust bag.
16 Foam filter.
17 Reusable bag
18 Combo nozzle
19 Floor nozzle
20 Gulper tool
21 Crevice tool
22 Air regulator handle
23 Plastic tubes.(x3)
3. ASSEMBLY
3.1. Ensure the mains plug is
disconnected.(fig.1)
3.2. Undo tank clasps.(fig.2)
3.3. Lift off the top section
assembly.(fig.3)
3.4. Remove contents from inside the
tank.(fig.4)
3.5 Turn the container upside down and
insert the four feet with castors in
the tank. Ensuring they are mouted
correctly pushed all the way in.
Screw on it tile tight.(fig.5a 5b)
3.6a. For dry vacuum cleaning fit the
supplied reusable bag.(fig.6a)
3.6b. For dry suction fit the supplied dust bag.
Inlet of the dust bug must go over
the rib on the suction seat.(fig.6b)
3.6c. For wet suction fit the supplied
foam filter.(fig.6c)
3.7. Re-assemble the top to the
tank.(fig.7)
3.8. Fasten the 2 clasps.(fig.8)
3.9. Attach the suction hose to the
suction inlet on the front of the
6