Charging The Battery; Battery Life; Battery Run Time - Chauvet DJ Freedom Par Tri-6 Guía De Referencia Rápida

Freedom Par Tri-6 QRG
Fuse
Replacement
Charging the
Battery

Battery Life

Indicator
Battery Run
Time
IRC-6
(Infrared Remote
Control)
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse
holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap
and replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The Freedom Par Tri-6 comes with a rechargeable lithium battery for cable-free
operation. To charge the battery, simply plug in the power cord at any time
before, during, or after operation. To charge the battery before or after operation
with all the LEDs off, leave the power switch in the Off postion.
For optiomal battery life, charge the Freedom Par Tri-6 battery 24 hours
prior to initial use.
The battery life indicator shows the remaining amount of internal battery life
when the the menu buttons are inactive.
100%
Maximum Run Time
(all colors on)
Up to 8 hours
The Freedom Par Tri-6 is compatible with the IRC-6 from Chauvet. For
more information on the IRC or to download instructions, go to
www.chauvetlighting.com.
75%
Maximum Run Time
(single color on)
Up to 20 hours
4
50% 25%
Recharge Time
6 hours
EN