RayTek Raynger ST60 ProPlus Manual De Instrucciones página 15

Reminders
Not recommended for use in measuring shiny or polished metal surfaces
(stainless steel, aluminum, etc.). See "Emissivity" for measuring these surfaces.
The unit cannot measure through transparent surfaces such as glass or plastic.
It will measure the surface temperature of these materials instead.
Steam, dust, smoke, or other particles can prevent accurate measurement by
obstructing the unit's optics.
Maintenance
Cleaning the lens: Blow off loose particles using clean compressed air. Gently
brush remaining debris away with a camel's hair brush. Carefully wipe the surface
with a moist cotton swab. The swab may be moistened with water. NOTE: DO NOT
use solvents to clean the glass lens.
Cleaning the housing: Use soap and water on a damp sponge or soft cloth. NOTE: DO
NOT submerge the unit in water.
ind Quality Products Online at:
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com
English
13