Troubleshooting - RayTek Raynger ST60 ProPlus Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

English

Troubleshooting

Code
– – – (on display)
Battery icon
appears
Blank display
Laser doesn't work
ERR
CE Certification
This instrument conforms to the following standards:
• EN50081-1:1992, Electromagnetic Emissions
• EN50082-1:1997, Electromagnetic Susceptibility
Tests were conducted using a frequency range of 80-1000 MHz with the instrument in
three orientations. The average error for the three orientations is ±1.4°C (±2.5°F) at 3
v/m throughout the spectrum. However, between 162 MHz and 792 MHz at 3 V/m, the
instrument may not meet its stated accuracy.
14
ind Quality Products Online at:
Problem
Target temperature
is over or under range
Low battery
Possible dead battery
(1) Low or dead battery
(2) Ambient temperature
above 40°C (104°F)
Possible damage
by EMF
GlobalTestSupply
www.
Action
Select target within specifications
Check and/or replace battery
Check and/or replace battery
(1) Replace battery
(2) Use in area with lower ambient
temperature
Contact your distributor
.com
sales@GlobalTestSupply.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Raynger st80 proplusRaynger st60 proplus standardRaynger st80 proplus enhanced

Tabla de contenido