Introduction; Warnings - RPB Vision-link Manual De Instrucciones

INTRODUCTION

The Vision-Link™ is a light unit designed to be used with RPB
as the Z-Link and T-Link
®
respirator that is directed at the work area and where the operator looks. The Vision-Link
also be mounted to most GoPro
POWER
The Vision-Link is powered by a proprietary rechargeable battery (09-055). The light is
™
provided by 3 bright white LEDs. There is only all on or all off. When starting fully charged, the
battery should last around 4 hours.
ENVIRONMENTS
The Vision-Link is a sealed unit and can be used in outdoor environments, but must not be
™
submersed in water or used in excessively wet conditions.
WARNING!
The LED lights in this unit are extremely bright and it is not recommended that they are shone in
the eyes of anybody as excessive exposure may cause harm or blindness.
Exposure to excessively wet conditions or submersion in water could cause serious injury or
death from electric shock.
CHARGING
The Vision-Link must charged using the 09-050 battery charger. Full charging cycles take 3
™
hours. The screen on the charger will display a gauge for each battery to indicate how charged
the battery is and will say "Full" when the battery is fully charged.
Before using the light for the first time, make sure a full charge is performed.
The batteries are manufactured to last
500 charge cycles for peak performance.
WARRANTY
All RPB products are covered by a manufacturers warranty of 3 months.
®
The manufacturer warranty covers defects in material, workmanship and does not cover damage
caused by misuse or abuse. RPB
replace or refund the purchase price of such parts or products upon the presentation of proof of
purchase. Maximum liability is in no case to exceed the value of the RPB
4
. It is intended to provide a clear bright light for the operator of the
®
mounts allowing for hands free light holding.
®
's only obligation and your exclusive remedy shall be to repair,
®
Link System™ Respirators, such
®
Product involved.
®
can
™