RPB Vision-link Manual De Instrucciones página 6

SETUP AND USE
ADJUSTING THE LIGHT ANGLE
Pull the adjustment lever open to loosen the
pivot.
INSTALLATION TO GOPRO
FIGURE 3.1
Remove the mounting bracket from the light
unit.
Note: GoPro
style mount is not included or
®
available from RPB
®
6
FIGURE 2.1
MOUNT
®
.
Rotate the light unit into the desired position.
Then close the adjustment lever to tighten
the pivot into place.
Insert the light unit into the GoPro
mount. Secure it with either the Vision-Link
Adjustment lever and screw or with the
tightening screw that may have come with
the GoPro mount.
®
FIGURE 2.2
FIGURE 3.2
style
®
™