Toshiba TCB-IFGSM1E Manual De Instalación página 15

Installation Manual
TCS-NET GSM Phone Control Interface
To set the name of specified air conditioner, click the NAME button, enter alphanumeric characters for test in the
Message Box following NAME, and then click the SEND button. NAME can be up to 19 characters of English
alphabets and Arabic numerals (spaces cannot be included).
When the entered alphanumeric characters appear in the following message in the textbox, the setting has been
successfully completed. When a PIN is set, enter the PIN and the alphanumeric characters for test with a space
separator after NAME, and then click the SEND button. **** indicates the PIN.
[SND] NAME +++ (or NAME***** ++++)
[SND]OK
(+++: Entered alphanumeric characters) **** indicates the PIN.
If an error is returned, an invalid PIN or characters may have been set.
The following figure shows the screen when the initial setting succeeded.
Checking Communication with Air Conditioner
Check the communication with the air conditioner.
Setting air conditioner ON/OFF
EN
While the air conditioner is OFF, click the ON button in the screen above. When ON appears in the Message Box,
click the SEND button. At this time, when the following message appears in the textbox at the centre of the screen
and the air conditioner is turned on as specified, the communication with the air conditioner is successful.
[RCV] ++++++++ SETTING OK
(++++++++: indicates the characters of the registered NAME)
While the air conditioner is ON, click the OFF button in the screen above. When OFF appears in the Message Box,
click the SEND button. At this time, when the following message appears in the textbox at the centre of the screen
and the air conditioner is turned off as specified, the communication with the air conditioner is successful.
[RCV] ++++++++ SETTING OK
(++++++++: indicates the characters of the registered NAME)
– 15 –
14-EN