Temperature
Controlled
Beverage
Cooler
(Some models)
Temperature Controlled Beverage Cooler keeps
beverages up to 5°F (3°C) colder than refrigerator
section. Air inlet allows air from freezer section to pass to
beverage cooler. Air inlet is located on interior wall of
refrigerator door.
Beverage cooler control is located on left front wall of
refrigerator section. Control adjusts amount of air
circulating in beverage cooler. Turn control to COLD for
normal refrigerator temperature and to COLDER for
colder temperature.
Beverac
coo er
Colder
Bevera(
Beverage
air inlet
•
Remove beverage cooler door by removing lower
door buckets. Remove door buckets by pushing tabs
toward center and pulling out. Slide door down and
out through bottom of door track.
•
Replace beverage cooler door by sliding door up
through bottom of door track. Retention glides must
remain in place to replace door. Replace door
buckets by sliding in until tabs lock into place.
Beverage cooler door
down to remove
Door Shelves
•
Remove slide-style door shelves by lifting ends up
and pulling out.
•
Replace slide-style door shelves by placing shelf on
glides and sliding down.
,_
CAUTION: To avoid property damage, confirm
she f s secure before replacing items on shelf.
Shelf
glide
Adjustable
Divider (Some models)
Adjustable divider keeps items in place and adjusts to
meet individual storage needs. Divider fits in any door
bucket or door shelf.
Adjustable
I
Beverage cooler
door
Remove shelf/¢
11