Installations; Analog Connections; Digital Connections - Philips CDR-795 Manual De Instrucciones

Installations

Analog connections

These connections are required for playback and recording
via an amplifier/receiver, equipped with analog in- and
outputs.
DIGITAL OUTPUT
OPTICAL COAX
PHONO PHONO CD CD
IN IN IN IN
L L
R R
DIGITAL
OPTICAL
IN OUT IN
1
Connect the red plug of the supplied audio cable (cinch) to
the red jack ANALOG IN R and the white plug to the
white jack ANALOG IN L on the CD player/recorder.
2
Connect the other end of the audio cable to the analog
outputs of the amplifier/receiver (CDR OUT,TAPE OUT,
AUX OUT, REC OUT, etc.).
3
Connect the red plug of the supplied audio cable (cinch) to
the red jack ANALOG OUT R and the white plug to the
white jack ANALOG OUT L on the CD player/recorder.
4
Connect the other end of the audio cable to the analog
inputs of the amplifier/receiver (CD-R,TAPE IN, AUX,
PLAY IN, etc.).
5
Connect all other components of your system (tape deck,
CD player, tuner, turntable, etc.) via their analog outputs to
the appropriate analog inputs of the amplifier/receiver
(CD IN,TUNER IN, AUX IN, PHONO IN, etc.).
Recording can be done now with any appliance connected
0 0
to an analog input of the amplifier/receiver. Press INPUT on
the CD player/recorder repeatedly to select the analog
input.
ANALOG IN is displayed.
➜
10
TURNTABLE
ANALOG OUTPUT
L
R
CD PLAYER
CDR/TAPE
IN OUT
L
R
AMPLIFIER/
RECEIVER
ANALOG
L
R
CD PLAYER/
OUT IN OUT
RECORDER
How to connect if the analog output on the
amplifier/receiver is already being used (occupied)
Most amplifiers/receivers have multiple analog output
connections (TAPE,VCR,...), but some amplifiers/receivers
have only 1 analog output. In case you have already hooked
up a tape deck (DAT recorder or MD recorder) to this
output you will have to change the existing connections.
1
Disconnect the analog connections from the tape deck to
the amplifier/receiver.
2
Connect the CD player/recorder (see steps 1–4 in the
previous chapter).
3
Connect the analog outputs of the tape deck to any free
analog inputs (AUX, CD) on the amplifier/receiver.You can
now playback your tape or record from your tape deck on
CD. However, it is no longer possible to record on tape.

Digital connections

Direct digital coaxial connection
This connection is required for direct recording from any
digital audio equipment with a digital coaxial output (e.g.
CD player or DVD player).
DIGITAL OUTPUT
OPTICAL COAX
DIGITAL
OPTICAL
IN OUT IN OUT
G
Use a digital coaxial cable to connect the coaxial output of
the external appliance with DIGITAL IN on the
CD player/recorder.
Recording can be done now via the digital coaxial input.
0 0
Press INPUT on the CD player/recorder repeatedly to
select the digital coaxial input.
DIGITAL IN is displayed.
➜
ANALOG OUTPUT
L
R
CD PLAYER
ANALOG
L
R
CD PLAYER/
IN OUT
RECORDER