Cleaning The Air Filter; Maintenance; Sharpening Blades - VOSS.farming easyCUT 85285 Instrucciones De Operación

8.2

CLEANING THE AIR FILTER

Clean the air filter regularly. The cleaning cycle depends on the frequency of use. Clean
the air filter as soon as you detect any contamination in the air filter at the latest.
1. Switch off the clipper and disconnect the clipper
from the power supply.
2. Remove impurities around the air filter.
3. To clean the air filter (5), push the air filter (5) out
and clean the filter with the enclosed cleaning
brush (fig. 7).
NOTICE
Make sure that no foreign bodies or impurities
enter the machine during cleaning.
4. Put the air filter (5) back into the clipper.
WARNING
Do not use the clipper without an air filter.
9

MAINTENANCE

Carry out regular visual checks. Check the machine for damage before each use.
CAUTION
Do not use the machine if there is visible damage.
9.1

SHARPENING BLADES

CAUTION
The sharpening of the blades may only be carried out by specialist dealers using
specialist equipment. Do not sharpen the blades yourself.
26
INSTRUCTION MANUAL VOSS.FARMING EASYCUT
Fig. 7
85285 | 11 | 2020 | V2