Descarga De La Imagen Sgcpu.flash - Sun Fire V1280 Guía De Administración

Tabla de contenido

Publicidad

Ejemplos
Descarga de la imagen sgpci.flash:
EJEMPLO DE CÓDIGO 8-1
# lom -G sgpci.flash
WARNING:
This program will replace LOMlite2 firmware version 5.13 with version 0.1
Are you sure you want to continue?
Enter 'C' and return to Continue or anything else to Terminate
C
Transferring 308 kB image to the system controller.
This may take several minutes.
...................................................
Validating image...
308 kB IO image transferred.
Programming /N0/IB6 PROM 0
Comparing image and flash
# Image and flash are different, proceeding with update.
Erasing
..... Done
Programming ..... Done
Verifying
..... Done
May 22 14:28:37 commando lw8: /N0/IB6 PROM 0 updated with version 5.13.5 05/17/2
002.
Firmware update complete.
You must reboot Solaris to load the new firmware.
#

Descarga de la imagen sgcpu.flash:

EJEMPLO DE CÓDIGO 8-2
# lom -G sgcpu.flash
WARNING:
This program will replace LOMlite2 firmware version 5.13 with version 0.1
Are you sure you want to continue?
Enter 'C' and return to Continue or anything else to Terminate
C
Transferring 792 kB image to the system controller.
This may take several minutes.
...................................................
Descarga de la imagen sgpci.flash
Descarga de la imagen sgcpu.flash
Capítulo 8 Procedimientos de actualización del firmware
87

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Netra 1280

Tabla de contenido