GOK SmartBox 1 Manual Del Usuario página 32

Menu
7.Relay 2
SmartBox 2
or
7.Relay
[SmartBox 3]
8.Exit
After performing entry steps 1 - 7, the programming process is completed. After confirmation
of step "8.Exit", the device automatically returns to default display mode; the current tank
content is shown in the display.
Special functions are available under entry steps 9 to 24.
After the end of setup, do not forget to replace the housing cover!
After completing the ASSEMBLY and PROGRAMMING, carrying out a function check is
recommended (FUNCTION CHECK section).
EXAMPLES FOR PROGRAMMING
Example 1: Basement tank for 6000 litres heating oil, litre indication, linear steel tank
Inner height 165cm, (fill level 125cm)
SmartBox
Step
1.Measure probe
2.Liquid
3.Tank shape
4.Tank volume
5.Filling limit
5b.Filling limit
6.View  View details
7.Exit
 press [Enter] to see the indication
12 / 20
Input function
See 7. Relay 1 for the data for Relay 2 (or Relay)
Press [Enter] to return to display mode
1 Standard probe 0 - 250mbar
®
®
SmartBox 1 / SmartBox
Entries / selection
250mbar
Heat oil
Linear
6000L
(set with [+] / [-] keys)
165.0cm
(set with [+] / [-] keys)
95%=157cm (set with [+] / [-] keys)
Fillspace+Percnt
display 2. line - (set with [+] / [-] keys)
Heat oil
-1.150L
®
2 / SmartBox
Input value
on ______%
off ______%
on ______°C
off ______°C
4.550L
76%
part no. 28 100 57 f
®
3