Change Pin - Amplicom PowerTel 580 Guia Del Usuario

A M
NSWERING

Change PIN

1. Press and hold
current 3 digit PIN will be announced and the fi rst new digit requested. Enter
a digit between 0 and 9.
2. Select the new fi rst digit using
base message counter. Press
3. Repeat the above procedure for the 2nd and 3rd new digits.
4. After the 3rd digit has been confi rmed, the new PIN will be announced.
Press at any time to exit the Change PIN code mode and return to stand-
by. The PIN code will remain unchanged.
Call in to check messages
1. Dial the system's phone number from a remote phone and wait until the
answering machine picks up the call.
2. Press twice, then enter the 3 digit PIN after the voice prompt.
3. Refer to the next section, "Manage messages from another phone" for
additional instructions.
32
ACHINE
(located underneath the base) for two seconds. The
or , the digits will also be shown on the
to confi rm.
Service Center