Amplicom PowerTel 580 Guia Del Usuario página 39

U
SE ON A PRIVATE BRANCH EXCHANGE
Use on a private branch exchange
If the phone is on an exchange (e.g. dial 9 to get an outside line), calls can
be transfered or called back by using the R button. Check with the system
administrator for system set-up and instructions. Private exchanges are
normally used in a business-setting.
To set the recall time
1. Open the menu by pressing , then scroll using or until Base
settings is highlighted and press .
2. Scroll using or until Recall is highlighted and press .
3. The current recall timing setting (e.g. Short) will be displayed.
4. Choose the desired recall timing setting (Short or Long) using or
and press .
Insert a dialing pause
Insert a pause before the dial tone if the system requires an outside line which
takes awhile to connect.
To insert a dialling pause, enter the number to reach the outside line and then
press for two seconds. A P on the display will show dialing pause is active.
Note: A dialing pause can be used with a phone number in the phone book.
39
1-866-AMPLICOM (267-5426)