Description Of The Pump; Operation; Technical Features; Overall Dimensions And Weight - HPP RLR 300/250 Manual Del Usuario

3.2 DESCRIPTION OF THE PUMP

HPP S.r.l
The pumps are built with high quality materials, worked and
processed by technologically advanced machines. The pumps consist of
three basic parts:
- Mechanical part
- Pumping part
- Hydraulic part
A. The Mechanical part consists of a cast iron body inside which the
following are housed:
- Crankshaft made from the solid part.
- Roller bearings.
- Connecting rods with high mechanical resistance and high load capacity.
- Guide pistons in stainless steel.
Oil splash lubrication is used for the whole unit.
B. The Pumping part consists of:
- Ceramic integral pumping elements
- High quality, long-life pressure seals
- Stainless steel seal supports
C. The hydraulic part consists of:
- Nickel-coated head with intake and delivery.
- Easy-to-inspect intake/delivery valves in stainless steel.

3.2.1 Operation

The positive-displacement pump requires a source of energy able to supply
the energetic increase necessary for the fluid and to drive the whole crank
mechanism and any other auxiliaries.
The main energy sources for this type of pump are electric motors and
internal combustion endothermic engines.
When the pump is on, the reciprocating motion of these pistons creates
vacuum inside the cylinder - during descent (intake) – which opens the
intake valves and brings the fluid back inside it; during ascent
(compression) an overpressure is created that opens the delivery valves and
evacuates the fluid outside.
These pumps normally feature several pistons to meet the flow rate and
regularity requirements of the outgoing fluid.

3.2.2 Technical features

The technical features of the RLR Pump series are given in the following
table.
Reduction gear
Pump Type
r.p.m.
RLR 300/250 1500 1800
RLR 360/200 1500 1800
RLR 420/170 1500 1800
RLR 480/145 1500 1800
Weight
450kg.

3.2.3 Overall dimensions and weight

905
RLR PUMP SERIES : Weight 405 kg
- Reproduction forbidden -
Volume Pressure
R.p.m.
L/m - US GPM (BAR - PSI)
566 300 – 79 250 – 3625
566 360 – 95 200 – 2900
566 420 – 111 170 – 2465
566 480 – 127 145 – 2102
Head
1÷6 bar
820
330
435
CV
kW
HP
140 190
140 190
140 190
140 190
Oil q.ty
16 lt.
31