Adjust Focus And Zoom - Axis P33–VESerie Guia De Instalacion

AXIS P33–VE Series Fixed Dome Network Camera
Tilt the Lens
NO NO TICE NO TICE TICE
Valid for AXIS P3365–VE/P3367–VE/P3384–VE: The lens should not be tilted more than
90°, this may cause damage to the product. Follow the instructions below.
The illustration below shows an indoor variant.
1
2
1
Locking screw
2
Lens holder
3
Lens
4
Screws
1. Open the Live View page, see Access the Product on page 25.
2. Loosen the two screws.
3. Check the Live View page and tilt the lens to the desired position.
4. If the lens needs to be tilted more than 90°, do the following:
- Loosen the locking screw.
- Rotate the lens holder 180°.
- Fasten the locking screw.
- Tilt the lens.
5. Tighten the two screws.

Adjust Focus and Zoom

NO NO TICE NO TICE TICE
Adjusting focus and zoom manually can damage the lens.
90°
3 4
23