Adjust Focus And Zoom - Axis M11 Serie Guia De Instalacion

AXIS M11 Network Camera Series
• Safari
• Chrome
For more information about using the product, see the User Manual
available at www.axis.com

Adjust Focus and Zoom

1. Loosen the lock screw for the focus ring.
2. Adjust the focus and zoom by navigating to Setup > Focus on
the product's web page. Follow the instructions in the online
help.
3. Re-tighten the lock screw for the focus ring.
Note
After adjusting zoom and focus, if optimal corner focus is not
achieved, rotate the entire lens to the factory-set position shown
in the illustration above. Then slightly rotate the lens clockwise
or counter-clockwise to reach focus in all corners.
www.a1securitycameras.com email: sales@a1securitycameras.com
® ®
with OS X
TM
or Firefox
1
Zoom puller
2
Lock screw
3
Focus ring
4
Lens
Available from A1 Security Cameras
and
®
with other operating systems.
20