Initializing Procedure; Thickness Knob Adjusting Procedure - AccuBANKER AB5500 Manual De Uso

1.2 Initializing Procedure

1. After turning On, the unit will conduct a self-check procedure by spinning the
rollers and showing the message "AccuBANKER-AB5500" on the LCD display
while all the electronic components are tested.
2. If an error message appears on the display, proceed in accordance with the
instruction given in the Section "Error Messages".
1.3 Thickness Knob Adjustment Procedure
1.The Thickness Adjustment Knob is set at 0 as the standard setting from factory.
2.Having the right thickness adjustment knob positioning will ensure a smooth
counting as well as a trouble-free unit's operation.
3.Trial and error attempts are recommended before you make the final
adjustment.
a. for new (thinner) notes, adjust toward "-"
b. for used (thicker) notes, adjust toward "+"
c. small adjustment toward "+" direction works best
8