Sears Craftsman 247.88790 Manual De Uso página 22

Safety & Decorative Labels
777I22363
DRIVE
AUGER
LOCK
777S32066
FRONT TOP OF AUGER HOUSING
CUT FOOT PICTORIAL FACING
AWAY FROM OPERATOR
DANGER
AVOID INJURY FROM
ROTATING AUGER -
KEEP HANDS, FEET
AND CLOTHING AWAY.
777D08418
®
6 FORWARD 6 FORWARD 6 FORWARD
2 REVERSE 2 REVERSE 2 REVERSE
MOLD-IN GRAPHIC
777D08419
9. 9. 9. 0 0
®
STEER
P O W E R E D S T E E R I N G
22
777I22339
CHUTE DIRECTIONAL CONTROL
CHUTE TILT DOWN
PUSH BUTTON PUSH BUTTON
CHUTE ROTATE CHUTE ROTATE
LEFT RIGHT
CHUTE TILT UP
STARTING INSTRUCTIONS:
1.) INSERT IGNITION KEY AND SNAP IN
PLACE.
2.) SET CHOKE AND THROTTLE TO FULL (ON)
POSITION. PUSH PRIMER BUTTON 3x.
3.) ROPE START:
PULL SLOWLY UNTIL HARDER TO PULL,
THEN PULL RAPIDLY TO START. REPEAT
PRIMING IF NEEDED.
ELECTRIC START:
DO NOT USE IN RAIN. CONNECT POWER
CORD AND PUSH STARTER BUTTON.
REPEAT PRIMING IF NEEDED.
4.) MOVE CHOKE SLOWLY TO OFF POSITION.
5.) TO STOP ENGINE: MOVE THROTTLE TO
STOP POSITION.
REF. 777S32236
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS.
SHUT OFF ENGINE AND WAIT UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING.
USE CLEAN-OUT TOOL OR WOODEN STICK TO
UNCLOG DISCHARGE CHUTE.
28" 28" 2 8 "
OPERATORS VIEW
777I22340
LEFT TURN RIGHT TURN
AUGER CONTROL TRIGGER CONTROL TRIGGER CONTROL DRIVE CONTROL
GO GO
(MODEL PLATE)