Spectrum-Analyzer Hm5014; Specifi Cations - Hameg Instruments HM5014-2 Manual Del Usuario

1 GHz Spectrum Analyzer HM5014-2
All data valid at 23 °C after 30 minute warm-up
Frequency Characteristics
Frequency Range : 0.15 MHz...1.050 GHz
Stability: ± 5 ppm
Aging: ± 1 ppm/year
Frequency Resolution: 1 kHz (6
Center Frequency Range: 0...1.050 GHz
LO Frequency Generation: TCXO with DDS (Digital Frequency Synthesis)
Span Setting Range: Zero Span and 1MHz...1000MHz
(1-2-5 Sequence)
Marker:
Frequency Resolution: 1 kHz, 6
Amplitude Resolution: 0.4 dB, 3
Resolution Bandwidths
(RBW) @ 6dB:
1 MHz, 120 kHz and 9 kHz
Video Bandwidth (VBW): 4 kHz
Sweep Time
(automatic selection): 40 ms, 320 ms,1 s*)
Amplitude Characteristics (Marker Related) 150 kHz...1 GHz
Measurement Range: -100 dBm...+10 dBm
Scaling: 10 dB / div., 5 dB/div.
Display Range: 80 dB (10 dB/div.),
40 dB (5 dB/div.)
Amplitude Frequency Response (at 10 dB Attn., Zero Span and RBW 1 MHz,
Signal – 20 dBm): ± 3 dB
Display (CRT): 8 x 10 division
Amplitude Scale: logarithmic
Display units: dBm
Input Attenuator Range: 0...40 dB (10 dB-increments)
Tolerance of input attenuator: ± 2 dB relative to 10 dB position
Max. Input Level (continuous)
40 dB attenuation: +20 dBm (0,1 W)
0 dB attenuation: +10 dBm
Max. DC Voltage: ± 25 V
Max. Reference Level: +10 dBm
Reference Level Accuracy rel. to 500 MHz, 10 dB Attn., Zero Span and
RBW 1 MHz: ± 1 dB
Min. Average Noise Level: approx. -100 dBm (RBW 9 kHz)
Intermodulation Ratio typical ›75 dBc (2 Signals: 200 MHz,
rd
(3 Order): 203 MHz, -3 dB below Reference Level)
Harmonic Distortion Ratio
nd
(2 harm.): typical › 75dBc (200MHz, Reference Level)
Bandwidth Dependent Amplitude Error rel. to RBW
1 MHz and Zero Span: ± 1 dB
Digitization Error: ±1 digit (0.4 dB) at 10 dB/div. scaling
(Average, Zero Span)
Inputs/Outputs
Measuring Input:
Input Impedance:
VSWR: (Attn. ≥ 10 dB)
Tracking Generator Output:
Output Impedance:
Test Signal Output:
Frequency, Level:
Supply Voltage for Probes (HZ 530):
Audio Output (phone):
RS-232 Interface:
Functions
Keyboard Input: Center Frequency, Reference Level,
Tracking Generator Level
Rotary Encoder Input: Center Frequency, Reference Level, Marker,
Tracking Generator Level
Max. Hold Detection: Peak Value Acquisition
Quasi-Peak Detection:* Quasi-Peak Valuation
Average: Mean Value Acquisition
Ref. Spectrum Memory: 2 k x 8 bit
SAVE / RECALL: Save and Recall of 10 Instrument Settings
AM demodulation: for audio
LOCAL: RS-232 Remote Control OFF
Readout: Display of various Measurement Parameters
1 ⁄ digit in readout)
2
1 ⁄ digit,
2
⁄ digit
1
2
N socket
50 Ω
typ. 1.5:1
N-socket
50 Ω
BNC-socket
48 MHz, -30 dBm (± 2 dB)
6 V DC
3.5mm Ø jack
9pol./Sub-D
Tracking Generator
Frequency Range: 0.15 MHz...1.050 GHz
Output Level: -50 dBm...+1 dBm
Frequency Response (0.15 MHz...1 GHz)
+1 dBm...-10 dBm: ± 3 dB
-10,2 dBm...-50 dBm: ± 4 dB
Digitization Error: ± 1 digit (0.4 dB)
Spurious Outputs better than 20 dBc
General information
CRT: D14-363GY, 8 x 10 div. with internal graticule
Acceleration Voltage: approx. 2 kV
Trace Rotation: adjustable on front panel
Power Supply: 105/253 V, 50 / 60 Hz ± 10 %, CAT II
Power Consumption: approx. 35 W at 230V/50 Hz
Safety Class Safety Class I (EN61010-1)
Operating temperature: +5°C...+40°C
Storage temperature: -20°C...+70°C
Max. rel. humidity: 5%...80% (non condensing)
Dimensions (W x H x D): 285 x 125 x 380 mm
Weight: approx. 6.5 kg
*) in combination with software AS100E only
Accessories supplied: Line Cord, Operators Manual, HZ21 Adapter Plug
(N-plug with BNC socket) and Software for Windows on CD-ROM
Optional accessories:
HZ70 Opto-Interface (with optical fiber cable)
HZ520 Antenna
HZ530 Near Field Probe Set for EMI Diagnosis
S p e c i f i c a t i o n s
21
Subject to change without notice