Manual Tuning Of Analogue Programmes; Naming Analogue Programmes; Easylink Function - Philips 28DW6558/01 Manual De Instrucciones

Manual tuning of analogue programmes

This menu allows you to store the analogue
programmes one at time.
W
& Press
.
MENU
é With the cursor, select the
then
MANUAL STORE
INSTALL
• PICTURE
MANUAL STORE
• SOUND
• FEATURES
• SYSTEM
• INSTALL
• SEARCH
• PROG. NO.
• FINE TUNE
• STORE
"
: select
SYSTEM EUROPE
detection*) or
WEST EUR
(DK standard),
EAST EUR
(LL' standard).
FRANCE
* Except for France (standard LL'): select the
option FRANCE.

Naming analogue programmes

If required, you can give a name to the first
40 analogue programmes (from 1 to 40) and
external connectors.
W
& Press
.
MENU
é With the cursor, select the
then (concealed at the bottom of the
NAME
screen) :
INSTALL
• AUTO STORE
• MANUAL STORE
• SORT
• NAME

EasyLink function

If the set is connected (by the EXT2 socket) to
a video equipped with the EasyLink function,
the language, country and analogue channels
found are automatically transmitted to the
video recorder at the time of installation.
A message is displayed on-screen during
loading.The list of video recorder analogue
channels is then the same as those of the set.
You must first check in the menus that the
Easylink function is activated :
12
menu
INSTALL
:
EUROPE
WEST EUR
EAST EUR
(automatic
(BG standard),
(I standard) or
UK
menu,
INSTALL
BBC_1
'
: If you know the frequency of the
SEARCH
programme required, enter its number directly
0 9
using the keys.Alternatively press
The search begins.As soon as a programme is
found, the search will stop.
If no programme is found, refer to the Tips chapter
on page 19).
(
: if the reception is not satisfactory,
FINE TUNE
try adjusting the frequency using the
keys.
§
: enter the required number with
PROG. NO
Ȭ 0
the or to
¬
è
: press .The programme is stored.
STORE
See also: EasyLink function, below.
! Repeat steps ' to è for each programme to
be stored.
ç To quit the menus, press
" Select the programme you wish to name using
0 9 @
the keys or
Note: on installation, the programmes are named
automatically when the correct information is
transmitted by the broadcaster.
Ȭ
' Use the
keys to move within the
name display area (5 characters) and the
îÏ
keys to choose the characters.
( When the name has been entered, press
.The name is stored.
MENU
See also: EasyLink function, below.
§ Repeat steps " to ( for each programme to
be named.
è To exit from the menus, press
W
& Press
key.
MENU
Ï
é Select
(
OPTIONS
The menu is displayed.
OPTIONS
Ï
" Use
key to select
¬
to set it to . If your video recorder is
ON
not equipped with this function, set to
∂
' Press
to exit the menus.
The EASY LINK setting is set to OFF by default.
¬
.
Ȭ
9
keys.
∂
.
#
P .
W
∂
.
¬
) and press .
and press
EASY LINK
.
OFF