Signal Mode; Alarm Management - VDO OceanLink 7 Instrucciones Para El Uso

Signal mode

The displayed alarms are read by the NMEA 2000/SAE J1939 network or are processed by the display
comparing the data received from the network or analog signals to the thresholds set. Engine alarms
concern all engines on the network.
When an alarm is triggered, the Alarm page appears and then disappears after the alarm is
acknowledged. See "Acknowledge an alarm" on the next page.
All active alarms appear in the Active alarms page that is added to the other data pages.
Note: an alarm configured as disabled is ignored and will not appear in the alarm list. The alarm signal is
inhibited during device configuration.
Active alarm page signals
60 7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG

Alarm management

Red icon: alarm.
engine alarms
l
battery alarms
l
oil alarms
l
temperature alarms
l
generic alarms
l