Remote Control; Changing The Decorative Plate - Dometic CLASSIC Serie Instrucciones De Montaje Y De Uso

RH418NTE, RH418NTEG
4.2

Remote control

No. in
Description
fig. 2, page 3
1 Red button: Resets the door control monitor
2 Black button: Low inside temperature (two different levels possible)
3 Yellow button: High inside temperature
4 Blue button: Medium inside temperature
5 Installation
!
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
!
CAUTION! Health hazard
To avoid a hazard due to instability of the device, it must be fixed in
accordance with the instructions.
!
NOTICE! Risk of damage
Do not use extension cords or ungrounded (two prong) adapters.
The cooling device is designed for free-standing installation, but can be built-in if the
following conditions are complied with to ensure satisfactory operation and maxi-
mum cooling efficiency.
• The cooling device must be levelled carefully to ensure proper function.
• For the glass door version: When the ambient humidity is above 65 % at 25 °C
ambient temperature, moisture will condense on the door.
• The socket outlet for the mains connection must be freely accessible.
5.1

Changing the decorative plate

➤ Change the decorative plate as shown (fig. 3, page 4 to fig. 6, page 4).
EN
Installation
15