Publicidad
Idiomas disponibles
Idiomas disponibles
Wavelinx Wireless Integrated Sensor System SWPD Series
Metalux recessed ambient luminaires with WaveLinx Wireless Connected Lighting (WCL) system combine power, lighting,
connectivity and software into a complete and powerful solution. Wireless integrated controls and advanced LED technology
deliver a simple to install, flexible, and secure solution.
WaveLinx is an industry-leading comprehensive and cost effective wireless lighting system. WaveLinx provides out-of-the-box
functionality to get off the job faster along with easy setup, programing, and control through the intuitive mobile application.
With drag and drop features along with Eaton's patent pending Automatic Code Commissioning, you'll save time and eliminate
the cost and complexity of programing while providing a flexible and reconfigurable wireless topology for future on the fly
space changes. WaveLinx provides a better user experience for building occupants through the personal user app and simple
control of the lighting and plug loads.
The system can use an optional integrated sensor in each luminaire, providing occupancy sensing and daylight dimming
from within the footprint of the fixture. With occupancy and light sensing built into the luminaire itself, the lighting design is
the control design. Using the WaveLinx Wireless Connected Lighting integrated sensor simplifies the design of the control
system, because the sensor covers the same area that the fixture does. Installation costs are reduced compared to traditional
controls, with nothing but the power connection to make. WaveLinx Wireless Connected Lighting securely connects
wirelessly to the fixtures, provides code-compliant energy saving strategies, gives occupants the ability to use lighting
presets, and adjust the light levels.
How it works:
• Recessed ambient luminaires are factory wired with integrated occupancy and daylight sensors with out-of-the-box
functionality.
• WaveLinx Mobile provides direct setup of the lighting system using drag and drop programming.
• Once a luminaire is placed in the correct area, a patent pending automatic commissioning tool provides a code compliant
LED lighting and control system that just works.
For a list of WaveLinx compatible fixtures, visit www.Eaton.com/wavelinx
S Y S TE M C ONFIGUR AT I ON S
Local system: Private office with integrated sensor(s)
Wireless Area Controller
H
(WAC-POE)
N
installed within 150ft
of WCL devices
Line Voltage
Encounter luminaires with
WR-15
WaveLinx Wireless
15A Receptacle
Integrated Sensor
Control
(optional)
Example no: 22EN-LD2-UNV-L835-HCD1-SWPD1-U
Note: The Minimum WaveLinx system requires at least one Wireless Area Controller, a Power over Ethernet (PoE) network and a WaveLinx equipped luminaire or control device. Other components are optional, and the
system is expandable. Use of the WaveLinx mobile application is optional. See WaveLinx Wireless Connected Lighting site for more information and design criteria.
WaveLinx continued next page
Installation Instruction Supplement - Metalux Luminaire with Integrated Sensor
W4S-RL-W
Scene 1
Scene 2
Scene 3
Pre-engraved Wallstation
Scene 4
(optional)
Installation Instruction Supplement –
ADF142495
Expanded system options, not required
Building LAN
PoE Power
Area or Room
(up to 16)
20A Dimming
Room Based
Relay
Occupancy Sensor
Wireless Controlled Lighting ready devices (optional)
(up to 200 per WAC)
www.eaton.com
WaveLinx Mobile App
used for system setup
Building
and personal control
Wireless
Wireless Area
Controller (WAC)
Controlled
Scene
Luminaires
Receptacle
Wallstation
w/WaveLinx
7
Publicidad
