Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
G side-
USING
THE CONTROL
PANEL
®
(8).......
(}
_()
.........
(9)
The Freezer button serves two purposes:
To set the Freezer to your desired
temperature.
To turn the Power Freeze function on
and off.
1,
To set the Freezer temperature, touch
the Freezer button.
You can set the temperature between
5 °F (-15 °O) and -8 °F (-23 °O).
2. Power Freeze function
Touch and hold this button for 3 seconds
to decrease the time needed to freeze
sroducts in the Freezer.
it can be helpful if you need to quickly
freeze easily spoiled items or if the
temperature in the freezer has warmed
dramatically.
(For example, if the door was left open.)
When you use this function, the energy
consumption of the refrigerator will
increase.
Remember to turn it off when you don't
need it and return the freezer to your
original temperature setting.
if you need to freeze a large amount of
food, activate the Power Freeze function at
least 20 hours before you put the food into
the freezer.
The Lighting button serves two purposes:
To turn the dispenser light on and off
To reset the water filter life indicator.
1. Light Function
Touching the Lighting button turns on
the Dispenser LED lamp in continuous
mode so that it stays on continuously.
The button also lights up. if you want the
Dispenser lamp to come on only when
some one uses the dispenser, press the
Lighting button to turn the continuous
mode off.
2. Filter Reset (3sec) Function
After you replace the water filter, touch and
hold this button for 3 seconds to reset the
water filter life indicaton
When you reset the water filter life
indicator, the Filter icon on the panel turns
Off.
The Filter icon turns red to let you know it
is time to change the filter.
See page 25 for more information.
Engl sh --22
Publicidad
Tabla de contenido
