Samsung RH29 Serie Manual De Instrucciones página 23

Ocultar thumbs Ver también para RH29 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Touching
this button turns E nergy Saver
mode onand off.
When you turn Energy
Saver on, t he
Energy Saver icon l ights.
Turn E nergy Saver off a nd the icon g oes
off.
The Energy Saver function automatically
turns o nwhen p ower issupplied
tothe
refrigerator.
Ifcondensation
orwater drops appear on
the doors, turn t he Energy Saver mode off.
Override:
Press the Energy Saver
/
Override (3 sec) button for 3 seconds to
turn on the Override function.
When the Override function is on, the
refrigerator ignores the SMART GRID
Demand Response) signal.
See page 27 for details.
The Fridge button serves two purposes:
To set the Fridge to your desired
temperature.
To turn the Power Cool function on
and off.
1. To set the Fridge temperature, press
the Fridge button.
You can set the temperature between
34 °F (1 °O ) and 44 °F (7 °O).
2. Power Cool function
Touch and hold this button for 3 seconds
to decrease the time needed to cool
_roducts in the Refrigerator.
It can be helpful if you need to quickly cool
easily spoiled items or if the temperature in
the fridge has warmed dramatically.
(for example, if the door was left open)
@)
The Alarm button serves two purposes:
To turn the door open alarm on and off
To switch the temperature units
between °C and °R
1. Door Alarm Function
If the door alarm is set to On, an alarm
beeps if a refrigerator door is left open for
more than two minutes.
The beeping stops when you close the
door. The door alarm function is pre-set to
On in the factory.
You can turn it off by pressing and then
releasing the Alarm button.
You can turn it back on in the same
fashion.
The icon lights up when the function is on.
When the Door Alarm function is on and
the alarm sound is triggered, the Door
Alarm Icon will blink while the alarm
sounds.
2. To switch the temperature units
between °C and °R
Touch and hold this button for 3 seconds
to select the temperature display you
want.
Each time you press and hold the button,
the °C and °F temperature modes
alternate and the °C or °F icon lights up,
indicating your selection.
Engl sh- 23

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rh22 serie

Tabla de contenido