Operating instructions
We congratulate you on your purchase of a AIRSTREAM ST!
You have chosen a first-class blower.
The device has been manufactured using high-quality materials.
Read through the operating instructions before commissioning.
Always store these operating instructions at the device.
Do not pass the device on to other personnel without the operating instructions.
Leister AIRSTREAM ST
blower
1. Important Safety Instructions
In addition to the safety instructions contained in the individual chapters of these operating instructions,
the following provisions are also to be followed strictly at all times.
Warning
Caution
FI
(translation of operating instructions)
Dangerous voltage, risk of death! The device must not be operated with a damaged
mains line! Before opening the device, pull the mains plug out of the socket, because
voltage-bearing components and connections will be exposed when it is opened!
Danger of fire and explosion with improper use of the blower, particularly in the
vicinity of flammable materials and explosive gases.
Connect the device to a socket with a protective conductor! Any interruption
of the protective conductor inside or outside of the device is dangerous.
Use extension cables with protective conductors exclusively!
The nominal voltage specified on the device must match the local supply voltage.
Main switches must be switched off in the event of a mains voltage failure.
Utilization of an FI protective switch to protect personnel working at construction
sites is mandatory when the device is used at such locations.
The device must be monitored continuously during operation.
Device may be operated only by trained specialists or under their supervision.
Children are not permitted to operate the equipment under any circumstances.
Protect the device from moisture and wet conditions.
Two persons are required for transporting the machine with the transport box.
GB
11