universalblue UVTBLANCO19-52 Manual De Instrucciones página 25

6. Unscrew the screw allocated in the upper part of the lamp structure (B) and place
the support rod (E) together with the upper canopy (D). Fix the lamp structure (B)
with the support rod (E) using the screw removed previously. The connecting
cables should be run through the inside of the support rod (E) to the opposite end.
Assembling the fan to the wall
7. Unscrew the side screws of the receiver bracket (G) as shown in the figure below.
8. Make the necessary holes in the wall so that the receiver bracket (G) can be fixed to
the ceiling. Note the previously listed annotations referring to roof types.
9. Place the assembled fan in the semi-circle of the receiver bracket (G) matching the
slit of the hemisphere and the receiver support (G).
z
z
z
z
z
z
Z
25