Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the compressed File Playback Data
If a disc containing both a compressed video file and a compressed
audio file is used, you have a choose to play back only a video or only
audio.
Setting item: DVD PLAY MODE
Setting contents: AUDIO / VIDEO
Only AUDIO data is played back.
AUDIO:
VIDEO:
Only VIDEO data is played back.
®
Displaying DivX
Disc Information
Setting item: DivX INFO.
If [
] of DivX INFO. is touched, a DivX
code is displayed.
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled Video CD, you can
choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: OFF / ON
OFF:
The PBC menu is not displayed.
ON:
The PBC menu is displayed.
RADIO Setup
Digital SEEK Setting (HD Radio mode
only)
After carrying out the steps 1 to 3 of "To display the General mode
screen" explained on page 36, perform the operation described below.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [SOURCE SETUP].
The SOURCE SETUP screen appears.
3
Touch [
] of RADIO SETUP.
The RADIO SETUP screen appears.
4
Touch [ ] or [ ] to select ON/OFF of DIGITAL
SEEK.
ON:
SEEK UP/DOWN is used only for the digital radio station.
OFF: SEEK UP/DOWN is used for DIGITAL and ANALOG radio
stations. However, the strong signals have priority during
SEEK.
5
Touch [
] to return to the previous screen.
Touch and hold [
] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
34
-EN
DISPLAY Setup
Display Setup Operation
To display the Display mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
®
file registered
• For automatic transmission vehicles, place the transmission lever
Now, the locking system for the Display mode operation has been
released. Engaging the parking brake can reactivate the Display
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3) of "To
display the Display mode screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the Display mode screen."
The following steps 1 to 4 are common operations to each
"Setting item" of DISPLAY Setup. Refer to each section for
details.
1
2
3
Setting items:
* Refer to "Data Download" on page 41.
4
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
in the Park position.
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
Touch [DISPLAY SETUP].
The DISPLAY SETUP screen appears.
Touch [ ], [ ] or [
] etc., of the desired item to
change its setting.
DIMMER / DIMMER LOW LEVEL / BACKGROUND /
AUTO BACKGROUND / DATA DOWNLOAD* /
BASE COLOR / SCREEN ALIGNMENT
Touch [
] to return to the previous screen.
Touch and hold [
] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
Publicidad
Tabla de contenido
