General; Safety Classifications In The User Handbook; Proper Use; Safety Provisions - riesel Design b170 Manual Del Usuario

General

This user manual is intended for the user of "b170" wheels of the rie:sel design brand It includes information on
installation, handling, maintenance and care of the wheels
The user manual must be read and understood by the user before use
Please keep the manual properly so that it can be read by third users and possible next owners

Safety classifications in the user handbook

Identification of hazards with high risk Failure to comply could result in serious injuries
WARNING
or even death
Identification of hazards with low risk level Failure to comply may result in minor injuries
CAUTION
This information provides information about preventing imminent material damages
N O T E

Proper use

The "b170" wheels from rie:sel design are designed for use on oad bicycles or cyclocross bicycles The scope
of usage ranges from the use on paved roads to gravel roads, forest trails and easy trails The maximum rider
weight limit is 100 kg including clothing and possible baggage (for example backpack)
The wheels are to be used solely in accordance with the intended use Beyond that, the
WARNING
user shall accept the sole responsibility
– 24 –

Safety provisions

Failure to comply with the installation instructions and usage instructions can result in
WARNING
fatal injuries! The following provisions are a prerequisite for a safe journey These ensure
proper operation of the components
– Installation and maintenance of the wheels requires basic knowledge in dealing with bicycles In the case of
uncertainty, please contact your dealer or rie:sel design directly
– The wheels must be compatible with other related components of the bicycle Example: tyres, tubes, dropouts
on the frame, etc
– Do not make any modifications or changes to the wheels
– The wheels may only be used according to their intended use
– Check before each trip that the wheels are properly attached
– Check wheels before and after the journey for damages
– Check for spoke tension, concentricity and wear regularly
– If damages are present, the wheels must not be used If in doubt, please contact your dealer or rie:sel design
directly
Heat is produced during braking Do not scald yourself on a hot brake flank or the disc
CAUTION
rotors
The model using rim brakes requires special attention If the instructions are ignored, it
WARNING
can lead to fatal hazards
– Only the Swissstop ® Black Prince brake pads may be used on the wheels for rim brakes
– Do not use any used brake pads
– Durable grinding brakes lead to overheating of wheels and can lead to failure of tyres, tubes or rims
– Always use both brakes briefly and powerfully at the same time at intervals Thus, the development of high
temperatures can be avoided
– Compared to aluminium rims, carbon rims have a different braking response During the first use of the
wheels, ride gently and carefully in order to get familiarised with the braking characteristics of the carbon
rims
Prevention of material damage to the components:
N O T E
– Only use tyre levers made of plastic Other materials can damage the rim, tyre or tube
– The maximum tyre pressure on the rim and the tyre must not be exceeded
– Use only tubes with Presta valve
– Pre-specified tyre dimensions may not be exceeded or fallen short of
– 25 –